You need power, but you don't want to hoist a ton. Here's the answer. DeWalt's revamped 18-volt compact drill/driver delivers on both counts, with a 1/2-inch chuck that... read more

You need power, but you don't want to hoist a ton. Here's the answer. DeWalt's revamped 18-volt compact drill/driver delivers on both counts, with a 1/2-inch chuck that grips beefy bits, an 18-position adjustable clutch, and a high-performance motor for the torque you need, packaged in a truly lightweight, comfortable drill. The variable speed has a high and low range for any application, and the reverse switch is right above the curved trigger for easy access. The included charger juices up a spent battery in an hour. We especially like the light weight, even more so because it doesn't cost in the power department. Lots of pluses: on-board bit storage, two batteries, hard case. We think contractors will be pleased with this drill, especially after a long day.--Kris Jensen-Van Heste (hide)

We think this benchtop is actually a cabinet saw in a compact, totally portable disguise. Its looks are completely deceiving, because it handles any job a big saw... read more

We think this benchtop is actually a cabinet saw in a compact, totally portable disguise. Its looks are completely deceiving, because it handles any job a big saw can, yet it's compact for the home workshop and super convenient to take to a job site.

First, it's got the largest table surface in the worksite class, but lift the lock handle and open out the built-in extension rails and, believe it or not, you're running sheet goods with a 25-inch rip capacity. The table surface is smooth as glass, and with a coat of wax on it, it's superb. The extension rails ride effortlessly and lock securely, and the extension doesn't give even under a full sheet of 3/4-ply. Bosch sells auxiliary left-side and rear supports for unbeatable capacity and stability.

The fence, not even considering that it's on a benchtop, is awesome. It locks front and back, slides like a dream, detaches and seats without any struggle, stores neatly right on board, and the viewer has a great magnifying lens (though none of us will admit we need it yet) for ultra-accurate fence settings. Out of the box, our fence was totally true and perpendicular to the blade. We like the substantial height of it, and it will easily accommodate any type of auxiliary fence you might want to put on it. The miter gauge is sturdier than what we usually see on a benchtop, and it's longer, too, for a little more room at the infeed and more stability, too. Positive stops were right on when we checked ours out of the box, but of course, you'll want to check yours anyway. And like the fence, the miter gauge stores neatly right on the saw base.

Startup is jar-free, and it's surprisingly quiet for a 15-amp saw, even under a full load. We didn't experience any bogging down at all in our trials, and Bosch says that's due to what they call Constant Response Circuitry. We're just toolhounds here, not rocket scientists, but it has something to do with monitoring the torque demand on the machine and instantly adjusting to deliver enough power for a totally consistent speed. It's direct drive, of course, yet we felt no-—and we mean zero—-vibration. Now, that could be because it's heavier than you'd expect a worksite saw to be, but because of the wheeled stand, that's definitely not a detractor.

Once the saw is mounted to this ingenious stand (and that's not a taxing task), it only takes seconds to set up or break down with practically no effort. It actually uses the saw's weight to raise and lower it, and it's perfectly balanced and provides an ergonomically comfortable work height. Big, beefy, treaded pneumatic tires roll beautifully over even the most rugged jobsite surfaces.

Bosch probably intended this as a worksite saw, but we think it's ideal too for the home woodworker and do-it-yourselfer, especially one who's tight on space. The stand lets you fold it up and roll it out of the way when your work is done. Absolutely can't go wrong with this one.--Kris Jensen-Van Heste (hide)

You need power, but you don't want to hoist a ton. Here's the answer. DeWalt's revamped 18-volt compact drill/driver delivers on both counts, with a 1/2-inch chuck that... read more

You need power, but you don't want to hoist a ton. Here's the answer. DeWalt's revamped 18-volt compact drill/driver delivers on both counts, with a 1/2-inch chuck that grips beefy bits, an 18-position adjustable clutch, and a high-performance motor for the torque you need, packaged in a truly lightweight, comfortable drill. The variable speed has a high and low range for any application, and the reverse switch is right above the curved trigger for easy access. The included charger juices up a spent battery in an hour. We especially like the light weight, even more so because it doesn't cost in the power department. Lots of pluses: on-board bit storage, two batteries, hard case. We think contractors will be pleased with this drill, especially after a long day.--Kris Jensen-Van Heste (hide)

The Porter-Cable Family of Belt Sanders In 1926 Porter-Cable introduced the first portable belt sander and tweaked the design five years later by adding dust collection and a... read more

The Porter-Cable Family of Belt Sanders
In 1926 Porter-Cable introduced the first portable belt sander and tweaked the design five years later by adding dust collection and a horizontally placed motor. Today, this company produces an assortment of powerful, durable belt sanders that are designed to perform -- and some of them weigh as little as five pounds.

About The 371K Belt Sander
This portable, compact belt Sander from Porter-Cable is shaped like an armadillo with an arched back and a rubber grip for one-handed operation. Because it's so perfectly balanced, no matter how you hold it you're directing force at the center of the platen for more comfortable, precise control. With a super light body weight (just five pounds) and advanced design, this model is sure to become a favorite go-to device -- and its designers aren't the only people who think so. In 2006 this belt sander won the Handy Magazine Innovation Award due to its great style, ease of use, and all-around great craftsmanship.

Packed to the gills with helpful features, the 371K is ready to work, with a removable dust port that helps keep your work space clean. Its 5 amp, 500 MWO motor delivers real power for clearing hardwoods, and the dust sealed, recessed switch is easy to access and minimizes accidental turn-offs. The removable auxiliary handle gives you exceptional control when you need two hands, and low center of gravity feels stable, no matter how you hold it. The 371K boasts a hardy plastic housing over metal components that are made to stand up to heavy use, with a flush side that lets you sand right up against perpendicular surfaces. This kit comes with an 80-grit sanding belt (2-1/2 by 14-inch) and a carrying case for easy transport to the job site or the workshop.

Applications
Ideal for broad, general workshop purposes, this belt sander smoothes and levels solid wood and veneered sheet goods, sands cabinet face frames, prepares edge-glued solid panels after clamping, and does a fine job of removing lots of stock quickly.

Key Technical Specs

• Power: 120 volts
• Belt size: 2-1/2 by 14 inches
• Belt speed: 1,100 sfpm
• Motor power: 5 amps

Warranty
The 371K belt sander is covered by Porter-Cable's standard one-year warranty.

What's in the box:
Porter-Cable belt sander, 80-grit sanding belt, carrying case. (hide)

Poulan Pro 18" Electric Chain Saw 18" steel bar 4.0 HP Electric Motor Automatic Chain Oiler Inertia Activated Chain Brake Reduced Kickback Guide Bar & Chain Case Included... read more

Poulan Pro 18" Electric Chain Saw 18" steel bar 4.0 HP Electric Motor Automatic Chain Oiler Inertia Activated Chain Brake Reduced Kickback Guide Bar & Chain Case Included Fully assembled 1 Year Warranty (hide)

All circular saws are not equal. This one would sit above the rest even if all that set it apart was its blade-change system. No more wrestling with... read more

All circular saws are not equal. This one would sit above the rest even if all that set it apart was its blade-change system. No more wrestling with wrenches—-say hello to Porter-Cable's Quik-Change keyless, tool-free blade change setup. It's ingenious in its ease and simplicity. But the good news doesn't stop there. It's aggressive and powerful, cutting cleanly through whatever you feed it. Some really nice features distinguish it, too, like the on-board cord clip that keeps the power cord clear of your cutting line. And the built-in dust port that rotates 205 degrees for efficient dust collection with a 1-inch outlet. Even the handle gets a nod from us, with its soft, comfortable grip. Miter capacity is a versatile 0-50 degrees, and of course, there's a super-accurate positive stop at 45 degrees. Whether you're a dedicated home do-it-yourselfer or a professional, you can't go wrong with this saw.--Kris Jensen-Van Heste (hide)

BDK PHS550B POWERED HANDSAW WITH BAG 3.4 AMP;4600 SPM MOTOR FOR CONTROLLED CUTS IN WOOD, PLASTIC and METAL;COMPACT and LIGHTWEIGHT; POWERED HANDSAW WORKS IN and AROUND THE HOME... read more

BDK PHS550B POWERED HANDSAW WITH BAG 3.4 AMP;4600 SPM MOTOR FOR CONTROLLED CUTS IN WOOD, PLASTIC and METAL;COMPACT and LIGHTWEIGHT; POWERED HANDSAW WORKS IN and AROUND THE HOME FOR INDOOR USE OR PRUNING;PATENTED TOOL-FREE BLADE CHANGE;LARGE CAPACITY BLADE and METAL CUTTING BLADE CUTS WOOD, METAL, PLASTIC and PVC FOR A VARIETY OF PROJECTS;STORAGE BAG EASILY STORES SAW, BLADES and CORD POWERED HANDSAW WITH BAG (hide)

Jet took a really nice band saw and, with a few improvements, made it fantastic. First off, it's got 25 percent more power than before, at 1-1/4 horsepower,... read more

Jet took a really nice band saw and, with a few improvements, made it fantastic. First off, it's got 25 percent more power than before, at 1-1/4 horsepower, and that alone makes a big difference, especially when resawing oak - it practically cuts itself without any bogging or hesitating. The motor's totally enclosed and fan-cooled for a trouble-free, long life.

(hide)

Laser Orbital Jig Saw, Powerful 5.5A Motor, Exclusive Quick Clamp Blade Change Provides Easy Tool Free Blade Changing, Integrated Laser Guide Aids Cutting Accuracy, Electronic Speed Control Allows... read more

Laser Orbital Jig Saw, Powerful 5.5A Motor, Exclusive Quick Clamp Blade Change Provides Easy Tool Free Blade Changing, Integrated Laser Guide Aids Cutting Accuracy, Electronic Speed Control Allows You To Choose The Optimal Speed For The Task, Metal Gear Case For Added Durability, Includes: Storage Case & 1 Wood Cutting Jig Saw Blade, 2 Year Warranty. (hide)

We can't think of anything we'd want to add to this little hummer. It's incredible what B&D has engineered into this system (we don't think it's fair to... read more

We can't think of anything we'd want to add to this little hummer. It's incredible what B&D has engineered into this system (we don't think it's fair to call it a "screwdriver"). Dual speed range lets you drill holes at high speed and drive screws at the slower speed. A 23-position clutch, just like what's on the big boys, will keep you from stripping your screws. But get this: Unlike conventional cordless screwdrivers and regular power drills, this tool's handle easily locks in three positions for tight areas and awkward spots. Genius! And just like the "real" drills, this one's got an accessible forward/reverse rocker switch for backing screws out, too. Here's something, though, that the big-boy drill makers should pick up: It's got on integrated light so you can always see your work surface clearly. For the money, we haven't seen anything like it. --Kris Jensen-Van Heste (hide)

Black & Decker's 3.6-volt PowerDriver is perfect for assembling furniture, mounting shelving, changing hardware, or any project where turning a standard screwdriver would be a painstaking process. The... read more

Black & Decker's 3.6-volt PowerDriver is perfect for assembling furniture, mounting shelving, changing hardware, or any project where turning a standard screwdriver would be a painstaking process. The rocker switch toggles easily between forward and reverse, and the automatic spindle lock allows you to manually start screws or finish them without stripping or overtightening. When installing hardware in hard-to-reach places, the narrow nosepiece gives you an extended reach. --Dori Anvinson (hide)

Sealed 100% ball bearing construction. Precision machined aluminum motor housing and base. Micrometer depth-of-cut adjustment. Lever release height adjustment. Dust proof switch. Auto release collet system ends "frozen... read more

Sealed 100% ball bearing construction. Precision machined aluminum motor housing and base. Micrometer depth-of-cut adjustment. Lever release height adjustment. Dust proof switch. Auto release collet system ends "frozen bits". STANDARD EQUIPMENT: Router motor, base, 1/4" collet, 1/2" collet, collet wrenches and operating manual. SPECIFICATIONS: 10 amp motor, 1-3/4 peak HP, AC only. (hide)

About the HP118K 23 Gauge Pin Nailer The 23-gauge pin nailer kit from Bostitch is ready to upgrade your woodworking operation with its hefty pin capacity. This tough... read more

About the HP118K 23 Gauge Pin Nailer
The 23-gauge pin nailer kit from Bostitch is ready to upgrade your woodworking operation with its hefty pin capacity. This tough model holds fasteners from 1/2-inch to 1-3/16-inch, which is a generous 19 percent increase over competitive models. Specially designed to minimize downtime, the HP118K's side-loading magazine adjusts to different fastener sizes automatically and houses up to 200 pins at a time; and the low-profile tip tapers down to the contact point for a clear line of sight from any angle.

The HP118K is packed with helpful convenience and performance features, including an integrated high/low power control for precise depth setting without changing your compressor settings. It also boasts a dual trigger for safe operation, 60 in./lbs. of power, a rear exhaust, and an overmolded grip for maximum comfort. This versatile nailer can countersink 1-3/16-inch pin nails into hard woods -- even oak and maple -- with ease.

With its lightweight aluminum body, the HP11k weighs just 2.17 pounds so you can lift and drive fasteners all day with less effort and fatigue. And since it's such a compact little brute (just 7.81 by 9.06 inches), you can maneuver it into all kinds of tight spaces without a hitch or a hang-up. This nailer accepts Bostitch, Senco, Accuset, and Porter-Cable 23-gauge pin nails; and this kit includes the nailer, 1/4-inch air fitting, and a plastic carrying case -- plus 500 each 1/2-inch nails, 3/4-inch nails, and 1-inch nails.

This pin nailer accepts a wide range of fastener sizes for greater versatility in your workshop or on your job site.

Applications
Created for use in cabinet shops, this pin nailer performs exceptionally well in all detailed woodworking applications. Use it to construct picture and mirror frames, or to install molding, decorative trim, and window beading.

Key Technical Specs:

• Driving power: 60 in./lbs.
• Fastener range: 1/2 to 1-3/16-inch 23-gauge headless pin nails
• Magazine capacity: 200 pins
• Operating pressure: 70-120 PSI
• Thread fitting type: 1/4-inch NPT

Warranty
This power tool is covered by Stanley Bostitch's exceptional 7-year limited warranty (in the U.S. and Canada only). For optimal performance of your Bostitch tool, always use genuine Bostitch fasteners and replacement parts.

What's in the box:
Bostitch pin nailer, plastic carrying case; 500 each 1/2-inch nails, 3/4-inch nails, and 1-inch nails.

Bostitch's History of Quality
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction and home improvement applications. Products include pneumatic staplers and nailers, compressors, manually operated staplers and tackers, coil-fed screw systems, rivet tools, glue guns, a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes -- plus office products and carton-closing staplers. For more than a century, Bostitch has served millions of individuals and construction professionals by creating and supplying fastening products of proven quality, durability, and reliability. (hide)

The Delta SM100M 13 Amp 10-Inch Compound Miter Saw delivers plenty of cutting power with its 13 amp motor. The large sliding fence accommodates cuts into extra-wide wood,... read more

The Delta SM100M 13 Amp 10-Inch Compound Miter Saw delivers plenty of cutting power with its 13 amp motor. The large sliding fence accommodates cuts into extra-wide wood, and the table pivots to 47 degrees on left and right angles for trickier cuts, with stops at 0, 22.5, and 45 degrees. The blade itself tilts from -3 to 48 degrees for bevel cuts, and you can set blade and table pivots to keep crown moldings flat while you cut them. The blade tilt lets you cut material as much as 5.875 inches wide. The 3.5-inch height of the base lets you pair it up with a 2-by-4 put on its end to create a job site work table for cutting longer pieces. The pre-drilled fence also lets you mount wood auxiliary fences for taller work pieces. This saw weighs only 28 pounds thanks to its aluminum-alloy material, and it comes with a dust bag so you won't be coughing for minutes after cutting your material, and a 2-year warranty. (hide)