You need power, but you don't want to hoist a ton. Here's the answer. DeWalt's revamped 18-volt compact drill/driver delivers on both counts, with a 1/2-inch chuck that... read more

You need power, but you don't want to hoist a ton. Here's the answer. DeWalt's revamped 18-volt compact drill/driver delivers on both counts, with a 1/2-inch chuck that grips beefy bits, an 18-position adjustable clutch, and a high-performance motor for the torque you need, packaged in a truly lightweight, comfortable drill. The variable speed has a high and low range for any application, and the reverse switch is right above the curved trigger for easy access. The included charger juices up a spent battery in an hour. We especially like the light weight, even more so because it doesn't cost in the power department. Lots of pluses: on-board bit storage, two batteries, hard case. We think contractors will be pleased with this drill, especially after a long day.--Kris Jensen-Van Heste (hide)

When the inquisitive engineers at Milwaukee Tools started asking professional carpenters what they wanted in a portable circular saw, they consistently heard the same three things: pure cutting... read more

When the inquisitive engineers at Milwaukee Tools started asking professional carpenters what they wanted in a portable circular saw, they consistently heard the same three things: pure cutting power, maximum control, and all-day comfort. The result of their research went into the creation of the Milwaukee 6391-21, arguably the best-built circular saw on the market.

For starters, the 6391 has a monster 15-amp, 5,800-rpm motor that produces 3-1/4 horsepower; that's nearly as powerful as a worm-drive saw, yet this 7-1/4-inch Milwaukee model is more than one third lighter.

Look closely and you'll notice that the blade is mounted on the left side of the motor. That southpaw position gives right-handed users a much clearer view of the cutting line since they no longer have to lean over their arm to see the blade. The 10.4-pound saw's thick aluminum shoe tilts up to 50 degrees for bevel cutting.

The 6391 is also equipped with Milwaukee's exclusive Tilt-Lok handle that can be adjusted to the most comfortable cutting position: to the rear for vertical cutting, on top for horizontal cutting, or anywhere in between. The saw comes with a carbide-tipped saw blade, blade wrench, storage case and owner's manual. -- Joseph Truini

What's in the Box
Circular saw, carbide-tipped saw blade, blade wrench, storage case, and owner's manual. (hide)

You need power, but you don't want to hoist a ton. Here's the answer. DeWalt's revamped 18-volt compact drill/driver delivers on both counts, with a 1/2-inch chuck that... read more

You need power, but you don't want to hoist a ton. Here's the answer. DeWalt's revamped 18-volt compact drill/driver delivers on both counts, with a 1/2-inch chuck that grips beefy bits, an 18-position adjustable clutch, and a high-performance motor for the torque you need, packaged in a truly lightweight, comfortable drill. The variable speed has a high and low range for any application, and the reverse switch is right above the curved trigger for easy access. The included charger juices up a spent battery in an hour. We especially like the light weight, even more so because it doesn't cost in the power department. Lots of pluses: on-board bit storage, two batteries, hard case. We think contractors will be pleased with this drill, especially after a long day.--Kris Jensen-Van Heste (hide)

It's a funny thing about jigsaws; most of us tend to reach for another tool in its stead, having had less-than-great experiences with the little beasts. But here... read more

It's a funny thing about jigsaws; most of us tend to reach for another tool in its stead, having had less-than-great experiences with the little beasts.

But here comes Bosch's 1590, and it elevates the outcast jigsaw to the most-wanted list.

The first thing we liked about this saw is its heft; it's beefy, solid and made with that famous Swiss quality. You wrap your hand around the soft, substantial grip, squeeze the ample trigger and the soft-start whirs gently; with hardly any effort from you, the blade slices through whatever's ahead of it. Perhaps because it's heavier than most jigsaws, there's practically zero vibration, giving you a delightfully smooth, no-buzz experience, something pretty much unheard of in your average jigsaw.

Another nice feature is the speed mechanism: Set your maximum speed on the trigger dial, then control your speed up to that max by squeezing the trigger. On long cuts, you can lock the trigger on, too, and the blower actually does keep your cutline clear.

If that's all this saw had going for it, that would be enough for us. But coolest of all is the blade-change system that literally ejects the blade in a split second, takes the new one and gets you right back to your cutting - all tool-free. Amazing.

If you've relegated the jigsaw to the bottom of your toolbox, you owe it to yourself to give this one a chance. We think it's fantastic. --Kris Jensen-Van Heste

What's in the Box
Precision wood blade, progressor wood blade, tight kerf blade, zero-clearance insert, non-marring footplate, carrying case

(hide)

Light as a feather and mean as a junkyard dog, DeWalt's 18-gauge brad nailer is a heck of a tool. We like the fit and feel of it,... read more

Light as a feather and mean as a junkyard dog, DeWalt's 18-gauge brad nailer is a heck of a tool. We like the fit and feel of it, and DeWalt wins points from us for putting low-nail indicators on the side and the top of the magazine. The sliding depth adjustment is fantastic: just unlock it with your index finger, slide the adjustment with your other hand, and you're ready to fire. Like DeWalt's other nail guns, this model has a nice plus in the 360-degree swivel exhaust cap that directs the flow away from you. Great pad, too--it didn't mar anything to which we introduced it. We like it. --Kris Jensen-Van Heste (hide)

Easy-to-clean fully polished keeps tools looking great. Headlock® box-ends spread turning force throughout entire head of nut or bolt, won't round off corners. Hot-forged, heat treated to exceed... read more

Easy-to-clean fully polished keeps tools looking great. Headlock® box-ends spread turning force throughout entire head of nut or bolt, won't round off corners. Hot-forged, heat treated to exceed ANSI specifications for strength and tolerance. (USA) Forged from tough alloy steel, heat treated, oil-quenched and tempered for a uniform hardness and maximum strength. Nickel-chrome plated to resist rust and corrosion, and to simplify cleaning. Standard Combination: 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8"; Combination Ignition: 5/32", 3/16", 13/64", 7/32", 15/64", 1/4", 9/32", 5/16", 3/8", 7/16". (hide)

It's a funny thing about jigsaws; most of us tend to reach for another tool in its stead, having had less-than-great experiences with the little beasts. But here... read more

It's a funny thing about jigsaws; most of us tend to reach for another tool in its stead, having had less-than-great experiences with the little beasts.

But here comes Bosch's 1590, and it elevates the outcast jigsaw to the most-wanted list.

The first thing we liked about this saw is its heft; it's beefy, solid and made with that famous Swiss quality. You wrap your hand around the soft, substantial grip, squeeze the ample trigger and the soft-start whirs gently; with hardly any effort from you, the blade slices through whatever's ahead of it. Perhaps because it's heavier than most jigsaws, there's practically zero vibration, giving you a delightfully smooth, no-buzz experience, something pretty much unheard of in your average jigsaw.

Another nice feature is the speed mechanism: Set your maximum speed on the trigger dial, then control your speed up to that max by squeezing the trigger. On long cuts, you can lock the trigger on, too, and the blower actually does keep your cutline clear.

If that's all this saw had going for it, that would be enough for us. But coolest of all is the blade-change system that literally ejects the blade in a split second, takes the new one and gets you right back to your cutting - all tool-free. Amazing.

If you've relegated the jigsaw to the bottom of your toolbox, you owe it to yourself to give this one a chance. We think it's fantastic. --Kris Jensen-Van Heste

What's in the Box
Precision wood blade, progressor wood blade, tight kerf blade, zero-clearance insert, non-marring footplate, carrying case

(hide)

Black & Decker CCC3000 - 18V Outdoor Kit, 18V cordless string trimmer with 12"" cutting path, telescoping shaft and auto feed spool with .065 line, model No. NHT518... read more

Black & Decker CCC3000 - 18V Outdoor Kit, 18V cordless string trimmer with 12"" cutting path, telescoping shaft and auto feed spool with .065 line, model No. NHT518 cordless hedge trimmer with dual action 22"" blade, and model No. NS118 cordless broom fo (hide)

About Bosch Power Handsaws In the Bosch family of power handsaws, you'll find an assortment of ergonomically designed, low-vibration tools that are crafted with professional-grade Bosch engineering. These... read more

About Bosch Power Handsaws
In the Bosch family of power handsaws, you'll find an assortment of ergonomically designed, low-vibration tools that are crafted with professional-grade Bosch engineering. These hardy saws are ideal for cutting wood, wood composites, and plastics. In addition to model 1640VS, you can also order this a Finecut saw with a full kit of accessories (1640VSK), with a separate miter table attachment (0603999018), or you can purchase a blow-molded case (2605438139).

About the Bosch 1640VS Finecut Power Handsaw
The 1640VS is a versatile, powerful handsaw that's perfect for flush-cutting and precision sawing applications. Loaded with features, this Finecut model has a variable speed setting that lets you match the power to the project, a left or right-side blade mount, and an ergonomic design that offers comfortable handling -- even in tight working spaces. With its tool-free blade change system you'll find swapping blades is a real snap, and the large on/off switch has an integrated gripping surface for easy access.

This Finecut saw has a 3.5 amp motor that produces 2,000 to 2,800 rpm. It has a 5/8-inch stroke length, and a 2-1/2-inch cutting capacity in wood -- plus a 3/4-inch cutting capacity in plastics. It operates at 120 volts, and weighs only 3.5 pounds. Double-insulated and UL-listed, this model complies with OSHA regulations. It comes with two blades: one fine-tooth blade (FS180ATU) and one fine-tooth/flush-cut blade (FS200ABU).

Applications
The 1640VS is ideal for flush cutting door jambs, window jambs, PVC drainpipe, flooring, and more. It works beautifully for precision sawing in wood, wood composites, and plastics.

Key Technical Specs

• 3.5 amp motor
• 5/8-inch stroke
• 2,000 to 2,800 rpm

Warranty
The 1640VS Finecut power handsaw is covered by a 1-year unconditional Bosch warranty.

What's in the box:
Power handsaw, two blades. (hide)

400 Watt, variable speed, and reversible. 2500 RPM at no load. No Load: 1.5 Amp. Running Current: 3.8 Amp. 3/8in. max. drilling dia.; 3/8in. keyed chuck. Amps: 3.8,... read more

400 Watt, variable speed, and reversible. 2500 RPM at no load. No Load: 1.5 Amp. Running Current: 3.8 Amp. 3/8in. max. drilling dia.; 3/8in. keyed chuck. Amps: 3.8, Chuck Size (in.): 3/8, Speed (RPM): 2,500, Side Handle: No, Keyless Chuck: No, Variable Speed: Yes, Case Included: No (hide)

An official The Texas Chainsaw Massacre? movie costume prop. Plastic chainsaw with mock blood stains makes electric saw sounds. Batteries included. Costume prop; 27"L.

An official The Texas Chainsaw Massacre? movie costume prop. Plastic chainsaw with mock blood stains makes electric saw sounds. Batteries included. Costume prop; 27"L. (hide)

Conveniently sized for detailed jobs. Powerful tool uses 2 Amps and runs at 13,500 OPM. Includes dust collector. Speed (RPM): 13,500, Amps: 2, OPM: 13,500, Dust Bag Included:... read more

Conveniently sized for detailed jobs. Powerful tool uses 2 Amps and runs at 13,500 OPM. Includes dust collector. Speed (RPM): 13,500, Amps: 2, OPM: 13,500, Dust Bag Included: Yes (hide)

10", Table Saw, 15A, Motor Quickly Rips Through Hardwoods With Ease, Rack & Pinion Fence Design Delivers Consistent Fence To Blade Parallelism, Telescoping Fence Rails Retract To Create... read more

10", Table Saw, 15A, Motor Quickly Rips Through Hardwoods With Ease, Rack & Pinion Fence Design Delivers Consistent Fence To Blade Parallelism, Telescoping Fence Rails Retract To Create A Small, Portable Package, 16" Of Rip Easily Cuts A Variety Of Larger Shelving & Trim Materials, Metal Roll Cage Base Offers Greater Durability Than Plastic Bases, Blade Can Be Adjusted 0 - 45 Degrees For Bevel Applications, Includes: Miter Gauge, Push Stick, 10", 24T Carbide Blade, Blade Guard, 90 Day Money Back Guarantee, 1 Year Free Service Contract, 3 Year Limited Warranty. (hide)